Technical Tip – Preventative Maintenance

Category: Spray Foam Contractors, Tech Tips   Posted by: demilec

Remember to change the TSL. Failure to change TSL will cause wetcup on reactor to freeze up. This will cause serious wear and damage parts to the reactor.  



Exposed grease on the outside of the machine housings usually is an example of a damaged O-ring or scratched or scored metal parts. 




As always read, understand and follow all instruction manuals and warning labels supplied with all equipment. Only trained and qualified personnel should perform repairs on the equipment. To access the latest equipment manuals visit


Leave a Comment

items marked with * are required