Safety Tip – SDS Book

Category: Safety, Spray Foam Contractors   Posted by: demilec
SDS

Keeping all of your SDS’s in plain sight and readily available is an OSHA requirement. In the case of an emergency, whether it be a personal injury, a spill or even a fire, the SDS will contain all of the...

Read More »

Technical Tip – Preventative Maintenance

Category: Spray Foam Contractors, Tech Tips   Posted by: demilec
photo1

Remember to change the TSL. Failure to change TSL will cause wetcup on reactor to freeze up. This will cause serious wear and damage parts to the reactor.       Exposed grease on the outside of the machine housings usually...

Read More »

January 2014 Parts Special – Advanze Lens Covers

Category: Special Offers, Spray Foam Contractors   Posted by: demilec
advanz-lens

Part Number Description List Price Sale Price C-045 Advanz Lens Covers $11.99 $7.99 *Pricing good for the month of January 2014 only. Contact the Demilec USA Parts and Equipment Division at (877) 336-4532 to purchase one...

Read More »

Safety Tip – Wheel Blocks

Category: Safety, Spray Foam Contractors   Posted by: demilec
wheel-block

Now that we are getting into the snow and ice season it is very important that we take the time to insure that our trucks and trailers are blocked up when parked and that they are on a flat surface so that they...

Read More »

Technical Tip – Spray Gun Cleanliness

Category: Spray Foam Contractors, Tech Tips   Posted by: demilec
spray-gun-cleanliness-1

One thing that often times is not considered when preparing to start applying foam is keeping the spray gun clean. That is until there’s a problem mid-day and the gun needs to come apart  for maintenance. When the time comes...

Read More »

December Parts Special – Pura Insulation Release

Category: Special Offers, Spray Foam Contractors   Posted by: demilec
pura-insulation-release

Pura® Insulation Release Formulated to prevent insulation foam from adhering to most surfaces where the product is applied. Part Number: Pura List Price: $15.50 Sale: $14.75 Sale Case quantity: $174.00   *Pricing good for the month of December 2013 only. Contact the Demilec...

Read More »

Safety Tip – Keep It Warm Safely

Category: Safety, Spray Foam Contractors   Posted by: demilec
heaters-1

With the coming of cooler winter months and the need to have warm drum temperatures to produce quality foam and maximize yields the electric heaters come out and everyone overlooks the safety aspects that go along with the use of...

Read More »

November Parts Special – Drum Blanket Heaters

Category: Special Offers, Spray Foam Contractors   Posted by: demilec
power-blanket

Bee Warm Pro – Drum Blanket Heater w/Adjustable Thermostat List Price: $725.00         Sale Price: $644.00* *Pricing good for the month of November 2013 only. Contact the Demilec USA Parts and Equipment Division at (817) 640-4900 to purchase one...

Read More »

Demilec USA Interview Couple Featured on Designing Spaces about Spray Foam Insulation

DSC_0174

Six months ago, Andy and Anitra Kitfield had their house insulated with Demilec USA’s spray foam insulation and had the experience documented by the hit television show, Designing Spaces: Think Green.  The Kitfield’s home is a 1952 Cape Cod style...

Read More »

Parts Special – FOAMZALL (Milwaukee 13 Amp) Electric Foam Trimming Saw

Category: Special Offers, Spray Foam Contractors   Posted by: demilec
foamzall

Part Number: FOAMZALL Part Name: FOAMZALL (Milwaukee 13 Amp) Electric Foam Trimming Saw List Price $526** Sale Price: $405** Description: The FOAMZALL includes the toughest Milwaukee® brand heavy-duty orbital Sawzall® around, which has a custom coupling to secure a 36″...

Read More »

Safety Tip – The Importance of an Eye Wash Station

Category: Safety, Spray Foam Contractors   Posted by: demilec
eye-wash-station

It is important to keep an eyewash station nearby at all times in your Spray Foam Truck/Trailer. It should be in an easy to get to, convenient place in your rig typically mounted on the wall. In the event an...

Read More »

Tech Tip – Fusion Gun Maintenance

Category: Spray Foam Contractors, Tech Tips   Posted by: demilec
fusion-gun-maintenance

Ensuring that your Fusion spray gun is properly maintained is imperative to get the job done quickly and efficiently.  To often we that guns are not working properly, but they have not been disassembled in weeks. There are 21 different...

Read More »

Tech Tip – Y Strainer

Category: Spray Foam Contractors, Tech Tips   Posted by: demilec
Y-strainer-body

In the following pictures you will see a Y strainer body, screen and seal.  This strainer is located on the supply side of the machine and is located on both the A and B sides.  These screens and seals should be checked...

Read More »

September Parts Special – Morse 4040 Service Filters

Category: Special Offers, Spray Foam Contractors   Posted by: demilec
Compresser Air Filter

Part Number: Mor-307152 Description: Compressor Air Filter List Price: $43.60 Sale Price: $35.00 Part Number: Mor-302601 Description: Compressor Oil Filter List Price: $ 98.00 Sale Price: $78.00 Part Number: Mor-302600 Description: Compressor Separator/Coalescer Filter List Price: $188.00 Sale Price $150.00...

Read More »

Safety Tip – Personal Protective Equipment (PPE) Guide for Spray Foam Applicators

Category: Safety, Spray Foam Contractors   Posted by: demilec
PPE

While working with chemicals or applying spray polyurethane foam products it is important to provide a safe working environment for the applicators and applicator assistants. It is important for workers to understand and adhere to safe handling practices for any...

Read More »

Safety Tip – Gloves

Category: Safety, Spray Foam Contractors   Posted by: demilec
gloves3

Choosing the right gloves to protect your hands, is an essential part for working with spray Polyurethane foam. You want to be able to have the chemical resistance, plus the ability to move your fingers. Not wearing gloves that are...

Read More »

Tech Tip – Overspray, A Contractor’s Worst Nightmare

Category: Spray Foam Contractors, Tech Tips   Posted by: demilec

What is Overspray? Do we protect against it, or prevent it? How do we fix overspray damage when it occurs? The object of any spray foam or coatings project is to confine the sprayed material to the intended target such...

Read More »

August Parts Special – 15% Off Bullard Cool Tube, 30 CFM Clean Air Box, Remote Alarm

Category: Special Offers, Spray Foam Contractors   Posted by: demilec
Bullard Box

Bullard Cool Tube Part Number: 10B-AC1000 List Price: $179.99 Sale Price: $152.99 Bullard Clean Air Box 30 CFM Part Number: 10B-CAB30HA List Price: $2,005.52 Sale Price: $1,704.69 Bullard Remote Alarm Part Number: 10B-RA List Price: $484.50 Sale Price:...

Read More »

OSHA NEP for Isocyanates

Category: Spray Foam Contractors   Posted by: demilec

The Occupational Safety and Health Administration (OSHA) has announced a new National Emphasis Program (NEP) developed to focus OSHA resources on occupational exposure to isocyanates. Demilec (USA) LLC has prepared this summary guidance document to assist our customers in understanding...

Read More »

Value Minded Net-Zero Community Development Underway in New York (Part 2 of 3)

IMG_0817

                      The Preserve at Mountain Vista is a new 9 home development being built in New Paltz, New York with a special focus on achieving net-zero energy consumption for all...

Read More »

Value Minded Net-Zero Community Development Underway in New York (Part 1 of 3)

IMG_0818

                      The Preserve at Mountain Vista is a new 9 home development being built in New Paltz, New York with a special focus on achieving net-zero energy consumption for all...

Read More »

Convenient New Way to Access Demilec Technical Library

Demilec USA is happy to announce an easy new way to access the Demilec Technical Library.  The full wealth of the Technical Library can now be accessed by visiting the URL www.DemilecDocuments.com.  Make sure to visit the link and bookmark...

Read More »

Safety Tip – Skin Injection / High Pressure Hazard

Category: Safety, Spray Foam Contractors   Posted by: demilec
graco-warning

An injury caused by high-pressure liquid can be serious.  If you are injured or even suspect injury, do you know what to do?  Do your employees know what to do? Graco has a Medical Information Card that provides valuable information...

Read More »

July Parts Special – Isotherm Cool Vest

Category: Special Offers, Spray Foam Contractors   Posted by: demilec
isotherm-vest

  Part Number Description List Price Sale Price ISO2 Blue Vest with Isotherm Pack $227.63 $184.95 ISO2XL Blue Vest with Isotherm Pack $239.59 $195.66 ISO2P Replacement Isotherm Pack $172.17 $139.89 *Pricing good for the month of July 2013 only. Contact the Demilec...

Read More »

June 2013 Parts Special – Allegro Blower Fans

Category: Special Offers, Spray Foam Contractors   Posted by: demilec
allegro_blower

12″ Model PN: AL-9535-12 List Price: $465.00 Sale Price: $345.00 8″ Model PN: AL 95-35-08 List Price: $335 Sale Price: $275.00 Pricing good for the month of June 2013 only. Contact the Demilec USA Parts and Equipment Division at (877) 336-4532...

Read More »